Burner Assembly BN 1132

Fe-Cr-Al Metal Fiber Mesh Burner: Infusing Your Home Water Heater with a Blue, High-Efficiency Flame

Are you tired of inefficient and unstable hot water experiences?

Pain Point 1: Orange Flame, Inefficient and Wasteful

Scenario: Old water heaters produce an orange flame with black smoke, as a large amount of heat is not fully released and escapes through the flue. Looking at the high gas bills every month, it feels like money is "burning away."

Data Fact: Traditional atmospheric burners have uneven flame temperatures, with thermal efficiency typically only 80%-85%, resulting in over 15% fuel waste.

Pain Point 2: Fluctuating Water Temperature, Unpredictable Shower Experience

Scenario: The water temperature is difficult to maintain during showers, especially when others are using the water simultaneously. Sudden temperature changes cause discomfort and safety hazards.

Data Fact: Unstable combustion leads to fluctuations in heating power output, with outlet water temperature deviations often exceeding ±5°C.

Pain Point 3: Noise and Carbon Deposits, Affecting Comfort and Lifespan

Scenario: A noticeable "bang" or whistling sound occurs during ignition and operation, and carbon deposits easily accumulate in the combustion chamber, requiring frequent maintenance and damaging the core equipment in the long run.

Data Fact: Carbon dust produced by incomplete combustion can cause a 2-5% annual decrease in heat exchanger efficiency and increase operating noise.

Pain Point 4: Slow Start-up and Sluggish Response

Scenario: After turning on the hot water, it takes a long time for the water temperature to rise; impatient people can't wait, and precious water resources are wasted.

Data Fact: From ignition to stable output of rated power, older systems may require 10-15 seconds or more.

Solution: A Revolutionary Combustion Core Derived from Industrial Technology

Core Feature: High-Temperature Resistant Fe-Cr-Al Alloy Metal Fiber Mesh Cover

This is not just a component, but a complete revolution in combustion. The thousands of micropores on the surface of the mesh cover achieve extremely uniform premixing of gas and air before ignition, resulting in a pure blue flame of almost complete combustion.

1. Blue Flame, Ultimate Energy Efficiency

Scenario Description: Say goodbye to orange flames. After the upgrade, you'll see a stable, transparent blue flame burning close to the mesh surface. Heat is efficiently and evenly transferred to the heat exchanger, directly translating into a noticeable reduction in gas costs.

Foundation of Trust: Fully premixed surface combustion technology boosts thermal efficiency to ≥95% (non-condensing models) or up to 108% (condensing models), with an estimated annual gas consumption saving of 20%-35%.

2. As Smooth as Breathing, Consistently Stable Water Temperature

Scenario Description: Combustion power can be adjusted in a wide and continuous ratio (e.g., 10:1), like a precise throttle, instantly responding to changes in your hot water needs and completely eliminating water temperature fluctuations.

Foundation of Trust: Extremely uniform flame distribution, combined with intelligent control, ensures domestic hot water temperature fluctuations of ≤ ±1°C, providing an unprecedented constant shower temperature experience.

3. Ultra-Quiet and Ultra-Clean Operation

Scenario Description: Combustion is quiet and gentle, with no more popping sounds. Simultaneously, due to complete combustion, almost no carbon monoxide or carbon dust is produced, keeping the combustion chamber clean year-round and significantly extending the overall lifespan of the water heater.

Foundation of Trust: Operating noise is reduced by more than 50%, and pollutant emissions (CO, NOx) are far below the most stringent international environmental standards (such as EU ErP).

4. Instant Ignition, Ultra-Fast Response

Scenario Description: Turn on the tap, and the burner ignites smoothly in a flash; hot water is available instantly, no waiting required.

Foundation of Trust: Thanks to the advanced ignition control system, the ignition delay time is less than 3 seconds, achieving near-instantaneous hot water response.

Wide Compatibility: Designed for High-Efficiency/Condensing Hot Water Systems

This burner is particularly suitable for upgrading or replacing energy-efficient fully premixed or condensing domestic hot water systems.

Key Compatible Brands/Technology Platforms:

High-efficiency condensing water heater/boiler brands: Rinnai (some models), Navien, Bosch (Condens series), Viessmann

Applicable Equipment Types: Domestic gas instantaneous water heaters, condensing boilers, and high-efficiency storage water heaters equipped with fully premixed combustion technology.

This is a core combustion component upgrade. Installation and commissioning must be performed by a professional to ensure perfect compatibility with the existing fan, gas valve, and control system. Before purchasing, please be sure to provide the specific brand, model, and combustion chamber dimensions of your equipment.